Franklin-fueling-systems T5 Series Fuel Management System Programming Guide Manual de usuario descargar pdf (Pagina 30)

Relay Modules

The Relay Module is a non-intrinsically safe module that has 8 identical Form C output channels. Each channel has a fuse

and three terminals. Each channel can be congured as NO or NC with the power off by wiring to the appropriate terminals.

Group Name Parameter Name

Parameter

Default

Description

Parameter

Input

Relay Modules

Module # 10 Amp

Channels

(No)

(0)

Select Yes if this is the 10 Amp relay module.

Number of relays used on this module.

Yes / No

0-8 (2 Amp

module)

0-6 (10 Amp

Module)

Channel #

Name (Relay 1) Given name of the channel.

abc#

Enabled (Yes) Yes if the channel is in use.

Yes / No

Type (Unknown) Equipment connected to the relays output. Unknown

Submersible

Alarm

Solenoid

Dispenser

Other

Polarity (Normal) Allows the polarity to be inverted.

Normal, Invert

Logic (OR Logic)

The type of logic that the gate will use to process incoming signals.

OR, AND, XOR

Physically Wired As (Normally Open) How the relay is wired externally.

NO, NC

Number of inputs (0) Number of devices that can control the relay.

1-32

Input #

Type (Unknown) Type of module that is sending the signal. Unknown

Controller

Power Supply

AC Input

Probe

2-wire Sensor

3-wire Sensor

4-20 mA

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 65 66

Comentarios a estos manuales

Sin comentarios

Franklin-fueling-systems T5 Series Fuel Management System Programming Guide Manual de usuario Pagina 30

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Franklin-fueling-systems T5 Series Fuel Management System Programming Guide