Franklin-fueling-systems T5 Tank Sentinel Programming Guide Manual de usuario descargar pdf (Pagina 41)

List of Alarms and Troubleshooting

For all alarms conditions, the troubleshooting steps provided in this chapter are suggested actions to take in the event of

an alarm. Follow all site policy procedures set by local governing agencies in the case of a spill, leak, or malfunction. If

the steps provided by this manual or the site policy are followed and the system still requires additional support, contact

Franklin Fueling Systems Technical Services.

The * (asterisk) symbol indicates that there may be a variation in the event. The part, or test type application event, is

indicated by the actual alarm you receive.

Displayed Alarm /

Warning

Device Description Recommended Actions

2-Wire Sensor Module is

Ofine

Slot 2-Wire Sensor Module is

ofine due to unknown

causes.

Follow safety procedures before working inside of the console. Visually

verify a steady, green “Run” light. If a red “Err” light is ashing or steady,

try to reboot the system. If the condition still exists, contact Franklin

Fueling Systems’ Technical Services Dept. for support on this issue.

2-Wire Sensor Module

Setup Error

None Programming errors made

during setup of the 2-Wire

Sensor Module.

Verify 2-Wire Sensor Module programming parameters. If the condition

still exists, contact Franklin Fueling Systems’ Technical Services Dept. for

support on this issue.

3-Wire Sensor Module is

Ofine

Slot 3-Wire Sensor Module is

ofine due to unknown

causes.

Follow safety procedures before working inside of the console. Visually

verify a steady, green “Run” light. If a red “Err” light is ashing or steady,

try to reboot the system. If the condition still exists, contact Franklin

Fueling Systems’ Technical Services Dept. for support on this issue.

3-Wire Sensor Module

Setup Error

None Programming errors made

during setup of the 3-Wire

Sensor Module.

Verify 3-Wire Sensor Module programming parameters. If the condition

still exists, contact Franklin Fueling Systems’ Technical Services Dept. for

support on this issue.

4-20mA Input Error ChannelANA Errors detected on the

inputs of the 4-20mA Input

module.

Follow safety procedures before working inside of the console. Verify

that programming parameters meet site specications. Check all wiring

associated with the input at fault. Test operation of 4-20mA device. If

the condition still exists, contact Franklin Fueling Systems’ Technical

Services Dept. for support on this issue.

4-20mA Module is Ofine Slot 4-20mA Module is ofine

due to unknown causes.

Follow safety procedures before working inside the console. Visually

verify a steady green “Run” light. If a red “Err” light is ashing or steady,

try to reboot system. If the condition still exists, contact Franklin Fueling

Systems’ Technical Services Dept. for support on this issue.

4-20mA Module Setup Error None Programming errors made

during setup of the 4-20mA

Module.

Verify 4-20mA Module programming parameters. If the condition still

exists, contact Franklin Fueling Systems’ Technical Services Dept. for

support on this issue.

AC Input Module is Ofine Slot AC Input Module is ofine

due to unknown causes.

Follow safety procedures before working inside of the console. Visually

verify a steady green “Run” light. If a red “Err” light is ashing or steady,

try to reboot system. If the condition still exists, contact Franklin Fueling

Systems’ Technical Services Dept. for support on this issue.

AC Input Module Setup

Error

None Programming errors made

during setup of the AC Input

Module.

Verify AC Input Module programming parameters. If the condition still

exists, contact Franklin Fueling Systems’ Technical Services Dept. for

support on this issue.

Air in Line Line ELLD detects air in line.

Where and how?

Alpha volume correction

error

Tank This error is caused my a

programming mistake in the

Special Products section.

Verify Special Product Alpha volume correction program parameters.

API volume correction error Tank This error is caused my a

programming mistake in the

Special Products section.

Verify Special Product API volume correction program parameters.

Controller Module is Ofine Slot Controller Module is ofine

due to unknown causes.

Follow safety procedures before working inside the console. Visually

verify a steady green “Run” light. If red “Err” light is ashing or steady

try to reboot system. If the condition still exists, contact Franklin Fueling

Systems’ Technical Services Dept. for support on this issue.

Controller Module Setup

Error

None Programming errors

made during setup of the

Controller Module.

Verify Controller Module programming parameters. If the condition still

exists, contact Franklin Fueling Systems’ Technical Services Dept. for

support on this issue.

Correction table error Tank Level and Volume mismatch

detected in Correction table

programming.

Verify that all levels and volumes are entered accurately into the

Correction Table programming.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 47 48

Comentarios a estos manuales

Sin comentarios

Franklin-fueling-systems T5 Tank Sentinel Programming Guide Manual de usuario Pagina 41

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Franklin-fueling-systems T5 Tank Sentinel Programming Guide