Franklin-fueling-systems Colibri CL6 Setup and Operators Guide Manual de usuario descargar pdf (Pagina 21)

Web Interface Available Pages

The following pages can be viewed in order to see data and perform control functions. Several pages and functions are

controlled by access level. If the Auto Refresh action is listed on the Action Bar of a page, then the data on the page does

not refresh automatically. Click Refresh on your browser to update the page or click on Auto Refresh to have the screen

updated continuously.

System

Page Description

Status Displays alarm status for all applications.

Alarms Shows a detailed list of all active Alarms and Warnings.

Reports Make alarm and application event reports.

Conguration Edit the access level passwords and IP information. (Administrator Only)

Registration View the installed options.

Diagnostics Displays SCALD status and Relay status

Tools Allows rebooting system, erase archives or restore factory defaults

About Lists manufacturer contact information

FMS

Page Description

Status Third navigation line appears showing tank inventory information and alarm status.

Alarms Lists all active alarms and the date and time they occurred.

Control Start tank tests, Set Auto-Calibration and calibrate probes.

Compliance Displays compliance information for all tanks.

Reports Make various reports like Inventory, Delivery, Tank Tests and Regulatory.

Setup / Cong

Refer to pages 8-14 for information. This menu and should only be used by a certied technician. See your Franklin

Fueling distributor for assistance.

Preferences

Change the way that data is displayed, change the units of measure and adjust the Auto Refresh rate. There are two

levels of preferences:

Preference Description

Personal These settings are saved and viewed only on your computer.

System Changes the way data is displayed for all Web Browser Interfaces and touch screen users.

Tank Leak Testing Using the Web Browser Interface

Before starting a tank leak test, wait 6 hours after the last delivery and 2 hours after last dispense in order for the tank to

become stable.

There must be no dispense during a tank leak test.

Tank leak tests can take from 2-8 hours to complete. (See Appendix E)

1. Open your web browser and connect to the site.

2. On the Primary Navigation Bar, select FMS.

3. On the Secondary Navigation Bar, select Control.

4. Select Tanks.

Tank Leak Tests

1. Check the box next to the Tank(s) you want to test.

2. From the drop-box, select the type of test (Monthly or Annual) you want to perform for each tank, .

3. Click on Start Leak Tests on the Action Bar.

Auto refresh

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 31 32

Comentarios a estos manuales

Sin comentarios

Franklin-fueling-systems Colibri CL6 Setup and Operators Guide Manual de usuario Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Equipo Franklin-fueling-systems Colibri CL6 Setup and Operators Guide