Franklin-fueling-systems Colibri CL6 Setup and Operators Guide Manual de usuario Pagina 27

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 32
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 26
27
Appendix C: Compatible Printers
Hewlett Packard Compatible Printers
Colibri consoles have a standard Type-A USB socket on the bottom of the console. The console uses Printer Control
Language (PCL) version 3 or higher protocol developed by Hewlett Packard (HP) to print to external printers.
Colibri consoles have two standard Type-A USB sockets on the bottom of the console. The console uses Printer Control
Language (PCL) versions 3 through 5 protocols developed by Hewlett Packard (HP) to print to external printers.
PCL 6 is not compatible with the Colibri consoles. However, many printers with PCL 6 can also support PLC 5. It is also
important to note that PCL 3 GUI is a subset of PCL 3 and is not compatible with the Colibri consoles.
Franklin Fueling Systems recommends the following HP printers:
HP Deskjet 6940
HP LaserJet P1505n.
Important Note
Do not use printers with a power save feature
Start the printer before starting the console
Appendix D - Standard Products Table
Product Name API Gravity (6B Compensation)
Leaded Regular 63.5
Unleaded Regular 63.5
Unleaded Plus 62.8
Unleaded Extra 62.8
Unleaded Super 51.3
Diesel 32.8
Kerosene 41.8
#2 Fuel Oil 32.8
Appendix E - Typical Tank Leak Test Times
For 7 Tank Sizes at Half Capacity ( Worst Case is 50% Full )
Tank Size in Gallons Typical - Tank Leak Test Times (to Finish)
4,000 2.0 hours
6,000 3.0 hours
8,000 4.0 hours
10,000 5.0 hours
12,000 6.0 hours
15,000 7.5 hours
20,000 8.0 hours
Note: The Leak Threshold value is one half of the Leak Test value.
Vista de pagina 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Comentarios a estos manuales

Sin comentarios