Franklin-fueling-systems LS500 Auto Learn Line Leak Detection Installation Manual de usuario descargar pdf (Pagina 14)

Line Status and Control Screens

The status of each line channel can be viewed at any time by navigating to the Line Status or Control screens. To get to 

the Line Status or Control screens, go to FMS > Status > Lines or FMS > Control > Lines.

LS500 Status Screen

The status of each line can be viewed at any time by navigating to the line status or control screens. 

Status and alarm Indicators Description

Status Indicates the condition of the line

Line Pressure Indicates the current line pressure

Enabled Green, enabled. Red, disabled

Not Learned Red, if not learned. Gray, if learned

Pump Shutdown Red, if pump is shutdown. Gray, if not shutdown

Alarm Red, if in alarm. Gray, if not in alarm

Running Gross Leak Test Green, if running test. Gray, if not running test

Running Monthly Leak Test Green, if running test. Gray, if not running test

Running Annual Leak Test Green, if running test. Gray, if not running test

Between Test Green, if running test. Gray, if not running test

Waiting out Thermal Green, if waiting out thermal, Gray, if not

Transducer Failure Red, if the LS-500 is not communicating with the transducer

Pump On Green, if the STP is on

Pump Request The LS-500 is attempting to turn the STP on

When viewing the Line Status Summary screen, remember to enable Auto Refresh. The Auto Refresh button will allow the 

on-screen results to be automatically updated. The screen update depends on the user-dened parameter Refresh Rate

found on the Conguration page.

The Line Control screen will automatically update line information. Administrator privileges will be necessary to use the 

Line Control screen. For instructions on FMS programming or on how to obtain an Administrator access level, please refer 

to the T5 Series FMS Programming Guide (p / n 000-2142) or the TS-550evo FMS Programming Guide (p/n 000-2173).

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Sin comentarios

Franklin-fueling-systems LS500 Auto Learn Line Leak Detection Installation Manual de usuario Pagina 14